# The Underarm Seam Slippage Test: Grading Knit Integrity on Vintage Sweaters and Cardigans

_By GradeThread Team · Published October 1, 2026_

> Pilling is cosmetic. Underarm seam slippage is structural. Here's the five-step test that tells you which one you're grading before the buyer finds out.

The seam slippage test is a gentle, controlled pull across the underarm seam of a vintage sweater or cardigan to see whether the knit loops or yarns shift, open, or run. If the seam holds, the defect is cosmetic. If the knit opens under light tension, it is a Structural Integrity problem and caps the grade, usually at Good or Fair.

Here is the scenario we see too often. A seller lists a 1980s wool cardigan as Excellent. The photos are clean, the pilling is minimal, the color is even. The buyer pulls it on, lifts an arm, and hears a soft tearing sound at the underarm. Not as described. Return shipping, a refund, and a relisted item that now needs a defect disclosure. The garment looked fine. The seam was not.

## What Seam Slippage Actually Is

Seam slippage happens when the yarns or loops next to a seam shift away from the stitching under tension, leaving a visible gap, a ladder, or a thin patch. It is different from a seam that has come unstitched. In a slipped seam, the thread may still be intact. The fabric next to it is what has given way.

Underarms are the highest-stress seam on any sweater. Every reach, hug, and arm raise pulls the fabric at that joint. Add perspiration salts, which weaken protein fibers like wool and cashmere over decades, and you get a seam that looks fine flat and fails under load. That is why we test it separately from the rest of the garment.

## Why It Belongs to Structural Integrity, Not Cosmetic Appearance

Resellers often lump all knit wear together. We do not. GradeThread scores five factors: Fabric Condition, Structural Integrity, Cosmetic Appearance, Functional Elements, and Odor & Cleanliness. Seam slippage lands in Structural Integrity because it affects whether the garment can be worn and washed without getting worse.

Pilling lands in Cosmetic Appearance. A sweater with heavy pilling and a sound underarm seam can still grade Very Good. A sweater with no pilling and a slipping underarm seam often cannot. Sellers who price by how the garment looks flat end up overgrading the one with the hidden weakness.

| Defect | Primary Factor | Fixable? | Typical Grade Impact |
| --- | --- | --- | --- |
| Light pilling | Cosmetic Appearance | Yes, shaver or comb | Minimal |
| Heavy pilling with thinning | Fabric Condition | Partly | One tier |
| Seam open, thread broken | Structural Integrity | Yes, resewn | One to two tiers |
| Seam slippage in the knit | Structural Integrity | Rarely, durably | Caps at Good or Fair |
| Weave breakdown or runs spreading | Fabric Condition and Structural Integrity | No | Fair or Poor |

## The Underarm Seam Slippage Test, Step by Step

You need a bright, even light and about two minutes per garment. Do not yank. The point is to apply the stress a wearer would apply, not to create damage.

1. Turn the garment inside out and lay the underarm seam flat under bright light. Look for thin spots, visible ladders, or yarn ends poking through.
2. Return it right side out. Check the same seam from the outside for puckering, gapping, or color showing through where the knit has opened.
3. Pinch the fabric about an inch on each side of the seam, with thumbs and forefingers close to the stitching.
4. Pull gently outward, perpendicular to the seam, as if you were widening the armhole by about a quarter inch. Hold for two seconds.
5. Release and watch. If the knit snaps back and the seam looks the same, record it as holding. If loops stay displaced, a gap remains, or yarns visibly shift, record it as slippage.

Repeat on the second underarm, then on the side seams and shoulder seams if the garment is a heavier cardigan. Photograph the seam under tension if there is any movement at all. That image is your evidence, for you and for the buyer.

### How to read the result

A seam that holds with no gap is a pass. A seam that shows a faint gap that closes on release is a watch item: note it, and grade conservatively. A gap that stays open, or a run that starts when you apply tension, is a failure. Stop testing and grade it as structural damage.

## Telling Slippage Apart from Pilling and Weave Breakdown

These three get confused because they all look like a worn sweater. They are not the same, and the buyer reacts differently to each.

- **Pilling** sits on the surface. Pull the fabric flat and the base knit looks continuous underneath. It passes the slippage test.
- **Seam slippage** is local to the seam line. The rest of the garment may be dense and even. The failure only shows under tension.
- **Weave breakdown** is general. Hold the fabric to the light and you see uneven density, thin zones, or loops that have lost their shape across a wide area, not just at the seam.

For weave breakdown, check the elbows, underarm panels, and cuffs. Spread the knit between your fingers against a window. If light shows through unevenly or the loops look stretched and flattened, you are looking at Fabric Condition damage, not a seam issue. This kind of damage generally pushes a sweater down to Fair or Poor, because it cannot be repaired by resewing.

## Where the Grade Lands

Use the test result alongside the other four factors, not on its own. A rough guide from how we apply the tier vocabulary:

- **Excellent or Very Good:** underarm seams pass cleanly, no thin zones, only light cosmetic wear. Seam repair history, if any, is disclosed and sound.
- **Good:** seams hold but show a faint watch-item gap, or there is a small, stable, professionally sound repair. Wearable with normal care.
- **Fair:** visible slippage at one or both underarms, or a hand repair that is already stressing the surrounding knit. Wearable but fragile.
- **Poor:** active runs, open seams with surrounding knit failure, or widespread weave breakdown. Parts or project piece.

NWT and NWOT sweaters are rarely affected, but deadstock vintage can still fail if it was stored folded for decades. Test it anyway.

## Disclosing Slippage Without Killing the Sale

Buyers on eBay, Poshmark, and Mercari tolerate disclosed flaws far better than surprises. A clear line in the listing such as "underarm seam shows slippage under light tension, photographed; sold as wearable with care" sets the expectation. Add the tension photo and the item specifics reflect an honest condition. That protects you in a not-as-described claim, since the buyer cannot say the defect was hidden.

Price the garment for the tier it actually earns. A Fair-tier cardigan sold at Excellent money is a return waiting to happen, and the refund plus shipping typically costs more than the discount you would have taken to price it correctly.

## Grade One Sweater and See the Report

If you have a vintage knit on the table that you are not sure about, run the five steps above first. Then grade it with GradeThread and compare. You will get a 1.0–10.0 grade, a Structural Integrity breakdown that flags seam condition, and a certificate you can attach to the listing. One garment is enough to see how the report reads.

---

Canonical: [https://gradethread.com/blog/seam-slippage-test-vintage-sweater-grading](https://gradethread.com/blog/seam-slippage-test-vintage-sweater-grading)